What To Do If Your Water Heater Unexpectedly Stops Working
What To Do If Your Water Heater Unexpectedly Stops Working
Blog Article
What're your ideas concerning No Hot Water — Water Heater Repair?
Numerous contemporary houses use an electrical hot water heater for their furnace, as a result of its comfort as well as simplicity of use. Nevertheless, much like any other electrical home appliances, issues may occur with its usage, suddenly. It can be really discouraging to get up to a cool shower as opposed to a warm one or having your bathroom with water that isn't warm adequate or perhaps too hot. Whatever the case may be, water heater problems can be quite nerve-racking. Fortunately, we've made a list of possible services to your water heater issues. There are a number of factors that could cause many of these problems, it could be an issue with the power supply, the electric burner, or the thermostat. Prior to doing anything, guarantee you shut off the primary power supply for security. Whatever the issue is, getting it repaired ought to not pose too much of an issue if you comply with these steps:
Inspect Your Power Supply:
As fundamental as this may seem, it is very required. Without sufficient power, your water heater will not function. So the first thing to do when your water all of a sudden retires is to validate that it isn't a power trouble. Examine if the fuse is burnt out or the breaker stumbled. If the circuit breaker is the issue, simply turn it off and on once more. Change any kind of damaged or worn-out fuse. Test the device with power after these adjustments to see if it's now working.
Examine the Burner in the Water Heater:
If it's not a power problem, after that try looking into your burner if it is still working. Test each of your burner to make sure the problem isn't with any one of them. If any of them is faulty, change that part and then examine whether the warm water is back on.
Check Your Thermostat:
If your hot water heater still isn't working or the water coming out isn't warm enough, you might need to check the temperature level settings on your top thermostat. Make sure the circuit breaker is turned off before doing anything. Open up the gain access to panel and press the red switch for temperature reset over the thermostat. This ought to aid heat up the water. Turn the breaker back on and examine if the problem has actually been settled.
Call An Expert:
If after replacing all malfunctioning parts and also resetting your temperature, the hot water heater still isn't working, you might need to call an expert plumber for a specialist opinion. The trouble with your heater could be that the cold and hot taps have actually been switched over or it may be undersized for the quantity of hot water required in your home. Whatever the situation might be, a professional plumber would certainly aid resolve the trouble.
Conclusion
Hot water heater problems are not always significant. A lot of them result from minor problems like a blown fuse or damaged heating element. Changing the damaged parts must do the trick. Nevertheless, if you are still incapable to solve the issue, give a call to your local plumber to come to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a passionate reader on No Hot Water — Water Heater Repair, I think sharing that excerpt was mandatory. Enjoyed our blog? Please share it. Let another person locate it. Thanks so much for going through it.
Contact Us
Report this page